| 
Нажми на картинку, чтобы увеличить ее
Фото может отличаться от реального вида предмета, но это не влияет на основные характеристики изделия | Электронный набор
RF: Remote Control + Receiver Module
Беспроводной приемный модуль, 4-кнопочный пульт дистанционного управления + исполнительный модуль 433 МГц, 4-канальный выход 4,5-5,5 В, 3 мА, дальность 15-50 м
На складе ...
код товара: 00-00068856
Кол-во | Цена без НДС, грн | Купить |
| Раздел:
Электронный набор
|
|
Product Introduction:
1.Operating Voltage:4.5-5.5V (input port) VCC:connects with power
positive;GND:connects with power negative
2.Output Way:the module power on defaults output low level;after pressing the
remote control,it will output high level;OUT1-OUT4 are respectively 4-channel
output ports
3.Max Output Current:every channel max output current is within 10mA
4.Quiescent Operating Current:3mA
5.Receiver Board Size:20*30*6mm
6.Receiving Distance:15-50m
7.Operating Mode:self-lock,inching,interlock modes can be set freely
8.Operating Indication:D1 (learning indicator lamp and receiving signal
indicator lamp)
9.Output Level:output high level is equal to or less than VCC voltage
Learning Method:
1.After power on,press the learning key,the learning indicator lamp will flash
for once;it represents the first channel trigger is successful;then press the
key on remote control you want to learn,the learning indicator lamp will flash
for twice,it represents the first channel learning is successful
2.After power on,press the learning key,the learning indicator lamp will flash
for twice;it represents the second channel trigger is successful;then press the
key on remote control you want to learn,the learning indicator lamp will flash
for twice,it represents the second channel learning is successful
3.After power on,press the learning key,the learning indicator lamp will flash
for three times;it represents the third channel trigger is successful;then press
the key on remote control you want to learn,the learning indicator lamp will
flash for twice,it represents the third channel learning is successful
4.After power on,press the learning key,the learning indicator lamp will flash
for four times;it represents the fourth channel trigger is successful;then press
the key on remote control you want to learn,the learning indicator lamp will
flash for twice,it represents the fourth channel learning is successful
5.Clear Way:when power off,press the learning key;then power on,the learning
indicator lamp will flash for four times;it represents module clear is
successful
Self-lock,Inching,Interlock Function Switch Operation:
1.Interlock:when power off,press the learning key and then power on;the learning
indicator lamp will flash for once,and loosen the key;then it sets interlock
output (press the key on remote control,the corresponding channel has output
while other channels are closed and no output)
2.Self-lock:when power off,press the learning key and then power on;the learning
indicator lamp will flash for twice,and loosen the key;then it sets self-lock
output (press the key on remote control,the corresponding channel negation and
exerts on impact on other channels state;loosen the remote control,the output
state will be remained)
3.Inching:when power off,press the learning key and then power on;the learning
indicator lamp will flash for three times, and loosen the key;then it sets
inching output (press the key on remote control,the corresponding channels have
output;if loosen the remote control,the output will be stopped)
|
